Posts Tagged ‘pommel’

Even if you’re not a dressage rider, it’s still important to sit straight and square in the saddle. Can you tell if you’re collapsing at your waist and sitting crookedly?

Ask a ground person to stand behind you.
1. Are your shoulders level (i.e. the same height)?
2. Is your seat in the center of the saddle so that each seatbone is the same distance from the middle of the saddle?

If your shoulders aren’t level which means that one shoulder is lower than the other, you’re collapsed at your waist, your shoulders aren’t the same height, and your seat isn’t in the middle of the saddle.

Here are 3 simple tips to help you sit straight and square:

Let’s say you’ve collapsed the left side of your waist, your left shoulder is lower, and your seat is off to the right.

1. Bring your right seat bone over and place it on top of an imaginary line that runs down the center of the saddle from the pommel to the cantle. You won’t really be on top of that line. You’ll just end up sitting in squarely.

2. Stretch your left arm straight up so it passes by your ear and your fingers are pointed straight toward the sky. Feel how that elongates your left side.

3. Now to keep yourself straight and stretching tall as you ride, pretend you have two sticks of equal length between your last rib and your waistband. If you collapse again, you’ll get jabbed in the ribs by the stick on the left side. And the stick on the right side will end up on the ground.

Are you sick and tired of complicated and confusing training techniques?
Are you frustrated by negative emotions like fear and lack of confidence?
Would you like to be trained by a Three Time Olympic Coach? Learn how by going to: http://janesavoie.com/

Author: Jane Savoie
Article Source: EzineArticles.com
Benefits of electric pressure cooker

Even if you’re not a dressage rider, it’s still important to sit straight and square in the saddle. Can you tell if you’re collapsing at your waist and sitting crookedly?

Ask a ground person to stand behind you.
1. Are your shoulders level (i.e. the same height)?
2. Is your seat in the center of the saddle so that each seatbone is the same distance from the middle of the saddle?

If your shoulders aren’t level which means that one shoulder is lower than the other, you’re collapsed at your waist, your shoulders aren’t the same height, and your seat isn’t in the middle of the saddle.

Here are 3 simple tips to help you sit straight and square:

Let’s say you’ve collapsed the left side of your waist, your left shoulder is lower, and your seat is off to the right.

1. Bring your right seat bone over and place it on top of an imaginary line that runs down the center of the saddle from the pommel to the cantle. You won’t really be on top of that line. You’ll just end up sitting in squarely.

2. Stretch your left arm straight up so it passes by your ear and your fingers are pointed straight toward the sky. Feel how that elongates your left side.

3. Now to keep yourself straight and stretching tall as you ride, pretend you have two sticks of equal length between your last rib and your waistband. If you collapse again, you’ll get jabbed in the ribs by the stick on the left side. And the stick on the right side will end up on the ground.

Are you sick and tired of complicated and confusing training techniques?
Are you frustrated by negative emotions like fear and lack of confidence?
Would you like to be trained by a Three Time Olympic Coach? Learn how by going to: http://janesavoie.com/

Author: Jane Savoie
Article Source: EzineArticles.com
Low-volume PCB maker

At first, tacking up can seem daunting, but if you have a set routine, you’ll quickly get the hang of it and your horse will to. Having your horse secured with a set of crossties that fasten to the halter from opposite sides at about normal head height is really helpful as this leaves the rider with both hands to work with the tack.

Don’t be in rush to tack up. Take the time to check your horse over first to make sure he hasn’t incurred any injuries or other problems. Slide your hand down each of the legs, pick up the hooves and be sure to pick out all the dirt, mud or debris using a hoof pick. This will give you a chance to check over your horse’s foot for any problems that could cause lameness under saddle. After checking the legs and hooves it is time to brush the back and sides. Give your horse a good scrub with a stiff brush to get rid of all of the built up hair and dirt, especially around the saddle area where it can cause particular irritation.

Since the halter is securing the horse to the crossties, you may want to start with the saddle. Place the saddle pad or blanket straight down on the horses back, just on the highest point of the withers and slide it straight back a fraction of an inch to position it. This ensures that the hair is all flat, if you have to reposition the blanket lift it off the horse, smooth down the hair again with a brush or your hand, then start over.

With the saddle pad or blanket in place, pick up the saddle with your left hand on the horn or pommel and the left hand under the back skirt or the cantle, depending on the saddle type. After securing the stirrups (you don’t want to get clunked in the head), place the saddle in onto the saddle pad just behind the withers. The saddle should be placed in the natural depression that occurs on a horse’s back. If you have a western style saddle, reach under the horse’s belly and grasp the cinch, make sure it is straight and tighten the saddle from the left side. With an English saddle you may need to walk around to the right side and affix the cinch, then move back around to the left to tighten it.

Most find bridling a horse the most challenging as many horses have learned to evade and throw their heads to avoid the bit. This can be corrected by slow and gentle movements, so always move with a purpose and don’t become excited or angry with the horse. Unbuckle the throatlatch and noseband if there is one, then standing in the same direction as the horse on the left side, hold the bit in your left hand and the top of the bridle in your right. Bring the browband of the bridle above your horse’s head with your right hand, thereby positioning the bit below the lips. Gently insert the bit by raising the top up and over the ears. Position both the bit and the headstall in the right place, then latch the throatlatch and noseband. Banging your horse’s teeth with the bit is no way to create a willingness to be bridled.

Mounting the horse is the opposite of dismounting and should be done in one fluid movement. With the reins in your left hand, grasp your horse’s mane in your right hand. Using the right hand to hold the stirrup, place your left foot in the stirrup, swing your body up and your right leg up and over the back of the horse, gentle sitting down into the saddle. Put the right foot in the right stirrup and you are all ready to go.